• Checking and preparation should commence well before the beginning of the season.
   

• It is of paramount importance to clean both inside and outside of sprayer after each day's work, even if the same chemical is being used the next day.
   

• Sprayer should be lubricated thoroughly and regularly, especially all moving parts, before starting the work.
   

• All parts should be inspected. Worn out, broken and damaged parts should be replaced.
   

• A detailed instruction manual giving simple advice and illustrated drawing of component and assemblies are provided with each new Hymatic sprayer.
   

• To avoid guess work and waste of time, it is necessary to specify correct name and code number of the part specified in the manual. Parts that are likely to be needed should be kept in stock.
   

• Extra time should be devoted to the sprayer at the end of the spraying season, before it is kept in the store.
   

• Sprayer should be cleaned thoroughly, since residual chemical if left over for several months will corrode parts of sprayer. Filters and Nozzles should also be cleaned thoroughly.
   

• The pump should be greased and operating / moving parts should be well oiled.

Applications

The spraying and dusting equipments are used for the following purposes:

• For the insecticides application to control insect pests on crops and in stores, houses, kitchen, poultry farms, barns, etc.
   

• For the insecticides application to control insect pests on crops and in stores, houses, kitchens, poultry farms, barns, etc.
   

• For the acarices application to control phytophagous mites.
   

• For the fungicides and bactericides application to control the plant diseases.
   

• For the herbicides application, to kill the weeds.
   

• For the harmone sprays application to increase the fruit set or to prevent the premature dropping of fruits.
   

• For the application of plant nutrients as foliar spray.
   

• For applying the powdery formulation of poisonous chemicals on the crops and for any other purposes.